We are searching data for your request:
Upon completion, a link will appear to access the found materials.
This page contains assessment/exam questions using data, figures, and graphs from research journals such as the Journal of Biological Chemistry which allow their use, or from journals such as from PLOS that are completely open access The papers and topics chosen were selected to assess student understanding of the American Society for Biochemistry and Molecular Biology (ASBMB) foundational concepts and learning objectives as well as MCAT2015 foundational concepts and objectives. Both ASBMB and the MCAT2015 strongly emphasis scientific inquiry and reasoning skills, which are perhaps best assessed by open-ended questions derived from the literature in which students must employ higher level Bloom skills of application and analysis.
These questions can also be used by students who seek more opportunities to practice interpreting research literature results. The ability to apply, analyze, and evaluate information and concepts are at the heart of scientific inquiry and reasoning skills which are central to the new ASBMB and MCAT2015 competency standards. The questions in this learning module are designed to assess these competencies using open-ended responses instead of multiple-choice questions. Answers can be found at the link at the bottom of this page.
Research Paper: A pH-dependent Molten Globule Transition Is Required for Activity of the Steroidogenic Acute Regulatory Protein, StAR. Bo Y. Baker, Dustin C. Yaworsky, and Walter L. Miller J. Biol. Chem., Vol. 280, Issue 50, 41753-41760, December 16, 2005
Steroids synthesis requires cholesterol, which get converted to pregnenolone by an enzyme in the inner mitochondrial membrane (IM). A regulatory protein, which we will call SR, is found in the outer mitochondrial membrane (OM) and is involved in cholesterol movement from the OM to the IM. Mutations in SR can cause congenital lipoid adrenal hyperplasia, a potentially lethal disease. The protein is synthesized in the cytoplasm as a 37,000 MW pre-protein, whose N terminal "leader sequence" targets SR to the mitochondria. Upon translocation of the protein to the IM, the leader is cleaved by proteolysis and is removed from the final active protein. The C-terminus must be critical for it's function since mutations in this region causes the hyperplasia discussed above.
Models of SR suggest that it is similar to related protein that have a β-barrel structure with a hydrophobic binding pocket which can bind cholesterol. If the first 62 N-terminal amino acids are removed from the precursor ("preprotein"), the protein (N-62 SR) retains activity. When added to LUVs with a lipid composition similar to the OM, only the C-terminal alpha helical end of the protein is protected from added proteases, suggesting that that end inserts into the OM, effectively tethering the protein to the OM. Using spectral analysis and proteolysis of the protein, it appears that the protein may adopt a molten globule state at both low pH or when bound to a LUV. A conformation change appears to be induced when the protein interacts with protonated head groups of the LUV. The C-terminal helix is more protected from proteolysis at pH 4.0 compared to 6.5. Modeling studies based on x-ray structures of homologous proteins show that the access channel to the hydrophobic binding site in the protein is not large enough to pass cholesterol. These results show that the protein must change conformations to elicit its biological activity. The experiments described below were done to determine if a conformational change occurs in the protein on interaction with lipids, and whether a molten globule state of the protein is formed.
A model structure of N-62 SR is shown below in Figure 1A. It has a tightly folded N-terminal domain and a more loosely folded C-terminal domain. A molecular dynamics simulation of the protein under 3 different protonation states was done in a bath of 9631 water molecules, in order to simulate possible conformational changes in the protein. The first charge state was defined to be neutral, simulating pH 7.0. Next they changed the protonation state of amino acids to reflect expected charges under acidic (pH 4) condition, which might promote a change to the molten globule state. In a last trial, they left the majority of the protein under neutral pH condition, but changed just the charge state of the C-terminal helix to acidic (pH 4.0) conditions.
Modeling and molecular dynamics of N-62 SR. A, ribbon diagram of the model of N-62 SR; the salt bridges between Asp (D)106 and Arg (R) 272 and between Glu (E)136 and Arg (R) 274 are shown as ball-and-stick representations (white, carbon; blue, nitrogen; red, oxygen). B, total energy levels of MD simulations as a function of time. Black, neutral; red, acidic; green, acidified C-helix. C, root mean square deviation (RMSD) of -carbons during MD of the initial N-62 SR structure. D, images of Asp-106-Arg-272 after 2800 ps of MD under neutral (top) and acidified C-helix conditions (bottom). The carboxyl carbon (Cγ) of Arg-106 in the ω1 loop (left) is bonded to two oxygen atoms, (Oδ1 and Oδ2), and the guanidino carbon (C) of Arg-272 in the C-helix (right) is covalently bonded to two nitrogen atoms (N2 and N1). Under neutral conditions, Arg-106 forms two hydrogen bonds to Arg-272 (Oδ1-Nω2 and Oδ2-Nω1), but under acidified C-helix conditions, the ω1 loop and C-helix movement and bonding are disrupted.
1. Which amino acids would be protonated on the shift from neutral to acidic (pH 4.0) conditions. Explain why the authors ran a simulation with just the C-terminal helix in the acidic protonation state.
2. Compare the energies of the neutral and acidified strucutures (1B) and the rigidity of the two structures in 1D. Which one is more compact? Flexible? Higher in energy? Which would be more consistent with a molten globule conformation? Do these structures support the notion that the protein might interact with the membrane through its C-terminal helix?
3. Snapshots of molecular dynamics simulations were taken every 100 picoseconds, and the distance between the Cγ of Asp (D)106 in the ω loop and the guanidino group of Arg (R) 272 on the C-terminal alpha helix was determined and represented graphically below in Figure 2C (top panel) below (same color coding as before). The bottom panel in 2C shows the distance between Asp (D)136 and Arg (R) 274.
Movement of the StAR molecule during molecular dynamics. A, C superposition of conformations from MD snapshots every 100 ps over the 3-ns simulations at neutral (left panel), acidic (middle panel), and acidified C-helix (right panel) conditions. The protein is dynamic, particularly in the distal ends and the loop regions, but the overall structure is well maintained at neutral and acidic pHs. At low pH, conformation transitions are particularly prominent at the Ω1 region. B, interatomic distances (in ï¿½) between Arg-272 and Asp-106 as a function of time during molecular dynamics simulations. The carboxyl carbon (Cγ) of Arg-106 in the Ω1 loop is bonded to two oxygen atoms, termed Oδ1 and Oδ2, and the guanidino carbon (Cζ ) of Arg-272 in the C-helix is covalently bonded to two nitrogen atoms, termed Nω1 and Nω2. The distances are plotted between these atoms and shown as follows: in red,Oδ1/Nω2; green,Oδ1/Nω1; black,Oδ2/Nω1; and yellow,Oδ2/Nω2. Under neutral conditions, the Oδ1/Nω2 and Oδ2/Nω1 distances are 2.8 ï¿½ 0.1 ï¿½, favoring hydrogen bonding; pairings of Oδ1/Nω1 and Oδ2/Nω2 are less likely. Upper panel, neutral; middle panel, acidic; lower panel, acidified C-helix. C, interatomic distances during MD. Top, distance (in ï¿½) between Cζ in Arg-272 and Cγ in Asp-106. Bottom, distance (in ï¿½) between Cζ in Arg-274 and Cδ in Glu-136. Black, neutral; red, acidic; green, acidified C-helix.
Referring to the location of the amino acids structure shown in Fig 1A, and the data in Fig 2C, which part of the protein is likely to change to promote access of cholesterol to sterol binding pocket in the protein?
In an attempt to run an additional control for their "in silico" molecular dynamics experiment, the authors found two pairs of amino acids with the amino acids in each pair being approximately 4 angstroms from each other in the C helix and adjacent loop. The two pairs were Ser 100/Ser 261 and Asp 106/Ala 268. They changed them to Cys and created "in silico" the following mutation pairs (in single letter code): S100C/S261C and D106C/A268C. Note: DA mutant places the C268 closer to the end of the C helix than in the SS mutant, where the C is position 261
4. Why did they believe that changes these amino acids to Cys would not dramatically change the folding of the protein?
5. Energy minimization results showed that the Cα backbone of the C-terminal helix or Ω loop did not change. What would the likely effect be on the local structure in the vicinity of the pair? How would the molecular dynamics simulation in the top panel of 2C change?
The mutants described above where made using site-specific mutagenesis, and SDS-polyacrylamide gels run.
6. Why did the mutants (DA) and SS migrated further on the gel than the wild type (WT) unmutated proteins?
7. When the mutant proteins were treated first with diothiothreitol (DTT) before electrophoreis, they comigrated with the WT proteins. When the mutant proteins were treated with diamide (oxidizes sulfhydryls to disulfides), their migration was not affected. The structures of DTT and diamide are shown below. Explain the gel results.
Characterization of the disulfide mutants. A, model of N-62 SR showing the locations of the SS mutant replacing Ser-100 and Ser-261 and the DA mutant replacing Asp-106 and Ala-268 with Cys. Both mutants are shown in a single molecule, but each was prepared separately. Note that the perspective is from "behind" the molecule, as compared with Figure 1A. B, SDS-PAGE gel of the SS (right) and DA (left) mutants. Lane designations in each gel are as follows: M, molecular weight standards; WT, wild type N-62 SR; SS and DA, untreated mutant proteins; diamide, mutant plus diamide; DTT, mutant plus DTT.
8. The amino acid sequence, as derived from the DNA sequence, shows that the WT N-60 protein has 3 Cys and the two mutants (DA and SS mutated as above to contain two Cys) each have 5. The amount of free Cys in each protein was determined using Ellman's reagent. Draw a reaction to show how a free Cys (represented as RSH below) reacts with Ellmans' reagent. What instrument would you use to measure the reaction and quantitate the levels of Cys?
9. Computer modeling of the WT N60 SR shows no disulfides and two accessible Cys. Compare the number of Cys residues determine by Ellman's for each protein in the presence and absence of sodium dodecyl sulfate.
|Protein||# Cys - SDS||# Cys + SDS|
10. A comparison of the CD spectra and the fluorescence emission spectra of the WT protein and two mutants, SS and DA were made. Why was this done?
Spectroscopic analysis. Top, far UV-CD spectra; bottom, fluorescence spectra of wild type (black), SS mutant (blue), and DA mutant (red) of N-62 SR.
Next CD measurements were made on the WT, SS and DA mutants at various pH to s
A, far-UV CD spectra of the wild type (left), SS mutant (middle), and DA mutant (right) of N-62 StAR. Each protein was assessed at pH 2 (solid red line), pH 2.5 (dotted red line), pH 3.0 (solid green line), pH 3.5 (dotted green line), pH 4.0 (solid blue line), pH 4.5 (dotted blue line), pH 6.0 (solid tan line), and pH 7.4 (black line). B, predicted -helical content of wild-type (black), SS (blue), and DA N-62 SR (red).
11. Compare the spectra in Fig 7A of the mutants, especially the DA mutant) to the WT. Also note the data in 7B. What is the overall effect on the change in the structure of the protein within in the mutants? Is all the data consistent with the idea that formation of the molten globule might play a role in the activity of the protein?
12. Based on your conclusions and the data, rank the following proteins as to their cholesterol binding activity: WT, SS mutant, DA mutant. Explain.
Answers: Literature Learning Module: Proteins 1